5.Secure the RAID card with the screw that you removed earlier.

6.Disconnect the data cable from ISATA1 and connect it to the PSAS1 connector.

7.Ensure that the SGPIO1_SEL jumper is set to pins 2-3. Refer to 2.7

SATAII/SAS backplane cabling on page 2-19 for the jumper setting details.

When using a PIKE RAID card, ensure that the data cables are connected to the PSAS1.

The heatsink on PIKE 2108 Series might interfere with the components on the expansion card. Ensure that the height of the component is less than 5.8 mm.

ASUS RS700-E7/RS4

2-25