2.8Removable/optional components
You may need to remove previously installed system components when installing or removing system devices. Or you may need to install the optional components into the system. This section tells how to remove/install the following components:
1.System fans
2.Redundant power supply module
3.Slim type optical drive (optional)
4.Intel® ASRK module (optional)
5.ASUS PIKE RAID card (optional)
Ensure that the system is turned off before removing any components.
2.8.1System fans
To uninstall the system fans:
1.Disconnect the system fan cable from the fan connector on the motherboard.
2.Lift the fan, then set aside.
3.Repeat steps 1 to 2 to uninstall the other system fans.
To reinstall the system fans
1.Insert the fan to the fan cage. The airflow directional arrow on the fan side should point towards the system rear panel.
2.Connect the system fan cable to the fan connector on the motherboard.
Chapter 2: Hardware setup |