Telephone Memory, Store a One-Touch Number | AT&T 2440 guide

TELEPHONE MEMORY

AT THE BASE

There are three one-touch dialing buttons, X, Y, or Z, on the base.

One-touch dialing buttons

Store a One-Touch Number

1Make sure the phone is off.

2Press and hold X, Y, or Zuntil you hear a beep.

3Dial the number you want to store.

4Press the same one-touch button again. You will hear a confirmation tone.

Delete a One-Touch Number

1Make sure the phone is off.

2Press and hold X, Y, or Zuntil you hear a beep.

3Press the same button again to delete the number stored there. You will hear a confirmation tone.

Dial a One-Touch Number

Press X, Y, or Zto dial the number stored in that location. The speakerphone is activated and the stored number is dialed.

18

Image 19

AT&T 2440 user manual Telephone Memory, Store a One-Touch Number, Delete a One-Touch Number, Dial a One-Touch Number

Contents

With Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents About Caller ID with Call Waiting Using More Than One HandsetBefore YOU Begin Choosing the Best Location Install the handset battery Installation Headset Belt Clip Telephone Feature Setup-Handset Feature SettingsHandset Softkeys Handset Features Base Features Telephone Feature Setup-Base Redial Answer a CallMake a Call Flash Call Waiting Hold VolumeTelephone Operation Mute Handset Icons Flash/Call Waiting Volume Telephone Operation Store a Number and Name in Memory Telephone Directory View a Memory Number Delete a Memory Number Dial a Memory Number Edit a Memory Number Dial a One-Touch Number Telephone MemoryStore a One-Touch Number Delete a One-Touch Number Handset to Handset Base to All HandsetsBase to One Handset Handset to Base Announced Transfer Handset to Base and All HandsetsTransfer Calls Blind Transfer Four-Way Conferencing Display Dial Options Caller ID OperationView Calls Log Dial Displayed Call Record Store Call Record in Telephone Memory Delete Call Records Charge the Handset Battery Pack Battery LifeBatteries Replace the Handset Battery Pack Spare Battery Power Fail Operation To re-initialize the handset and base Case of DifficultyIf the phone does not work at all, check these items first If you have no dial tone If the caller’s name or phone number is not displayed If you hear noise or interference when using the phoneIf the phone does not ring when you receive a call If your telephone misdials