Erase a Call Record, Erase All Call Records | AT&T 9452 guide

CALLER ID OPERATION

Erase a Call Record

1Make sure the handset is off.

2Press +or -until the screen displays the call record you want to erase.

3Press S.

4Press -until ERASE is flashing, then press S.

5Press -until YES is flashing, then press S.

Erase All Call Records

1Make sure the handset is off.

2Press +or -until the screen displays a call record.

3Press S.

4Press -until ERASE is flashing, then press S.

5Press -until ALL is flashing, then press S. The screen displays

ERASE ALL? NO YES.

6Press -until YES is flashing, then press S.

Display Screen Messages

Screen Displays: When:

PRIVATE NAME The other party is blocking name information.

PPP	The other party is blocking number information.

PRIVATE CALLER The other party is blocking name and number information.

UNKNOWN NAME Your phone company is unable to receive information about this caller’s name.

OUT of AREA Your phone company is unable to receive information about this caller’s number.

UNKNOWN CALLER Your phone company is unable to receive information about this caller’s name and number.

EXTENSION USED An extension phone on this line is being used, so call information cannot be received.

17

Image 19

AT&T 9452 user manual Erase a Call Record, Erase All Call Records, Display Screen Messages

Contents

Part 1 Important Product Information Advanced American Telephones. All rights reserved Contents Page About the Data Port About the Spare Battery ChargerBefore YOU Begin About Caller ID with Call Waiting Before You Install Installation Select base ringer volume for each line Install the handset battery Connect the telephone line cords Table/Desk InstallationConnect the power cord Charge the handset battery Position the wall mount adapter on the base Wall InstallationConnect the power cord to the phone Check for dial tone Mount the base on the wall Telephone Feature Setup Feature SetupTelephone Features Telephone Operation Four-Way Conference Calls Temporary Tone DialingConference Calls Three-Way Conference Calls Call Timer Switching from Handset to Base SpeakerphoneHeadset Jack Operating Range Mute AT the Base Page/Intercom Base Ringer VolumeSpeakerphone Volume Hold View Call History Caller ID OperationDial a Number from Call History Erase All Call Records Erase a Call RecordDisplay Screen Messages Store a Directory Name & Number Telephone DirectoryChange/Replace a Stored Directory Number Dial a Directory Number Edit a Directory Name & NumberErase a Directory Name & Number Store a Call History Record in Directory About Mailboxes Audible IndicatorsAbout Announcements Press Uuntil you hear Set outgoing message Record Your Announcement Feature Summary Answering System Feature Setup Delete Messages Adjust Playback VolumeListen To, Save & Delete Messages Play Messages Voice Menu Call Screening/InterceptRecord a Memo Connect with the Answering System Remote Access Commands 99 ↔ F Message Window Display Replacing the Handset Battery Pack Charging the Handset Battery PackBatteries Spare battery compartment cover Installing a Spare Battery Case of Difficulty If the handset does not ring when you receive a callIf the phone doesn’t work at all, check these items first If you have difficulty hearing messages If you hear noise or interference when using the phoneIf you hear other calls while using your phone If messages are incomplete If your outgoing announcement isn’t clear If CL appears in the Message Window Answering System Remote Commands Machine is off press #0again Press