TELEPHONE OPERATION

AT THE HANDSET

Temporary Tone Dialing

If you have dial pulse (rotary) service, you can change from dial pulse to touch tone dialing during a call by pressing *. This is useful if you need to send touch tone signals for access to telephone banking or long-distance services.

1Dial the number.

2Press *. Buttons pressed after this send touch tone signals.

3After you end the call, the phone automatically returns to dial pulse (rotary) service.

Conference Calls

Three-Way Conference Calls

You can use both lines at the same time to set up a three-way conference call from the handset.

1Answer or make a call on one line.

2Press H.

3Press the other LINE button, and make or answer another call.

4Press cto connect all parties. Both LINE buttons flash during a conference call.

5Press Oto end the entire conference call.

NOTE: If you want to end the call with just one side of a conference, press that LINE button, press O, and then press the other LINE button to speak with the other party.

Four-Way Conference Calls

You can set up a four-way conference call with Line 1, Line 2, the handset, and the base speakerphone.

1Establish a conference call at the handset (see “Three-Way Conference Calls” above).

2Press Lon the base.

3Press lon the base.

4Press con the base to connect all parties.

11

Page 13
Image 13
AT&T 9452 user manual Temporary Tone Dialing, Three-Way Conference Calls, Four-Way Conference Calls