![](/images/new-backgrounds/1310235/31023563x1.webp)
1
^DIR
DIRECTORY
2^DIR
ADAM 5551234
3 SELECT/TRANSFER
EDIT DIAL ERASE 5551234
^DIR
EDIT DIAL ERASE 5551234
^DIR
EDIT DIAL ERASE 5551234
Press SELECT/ TRANSFER to choose blinking option on the handset.
NOTE: Screens shown above are displayed on the cordless handset. The base display is slightly different, but the procedure is the same.
NOTE: See Page 27 for instructions on dialing a directory entry from the base.
Directories
To copy, edit or delete an entry
You can make existing directory entries Speed Dial entries if they are stored in the handset.You can also change names, numbers and the distinctive ringing settings, or erase entries, that are stored in the cordless handset or the base. When any entry is displayed, press SELECT/TRANSFER to see the options. Press CIDV or ^DIR to highlight the option you want (blinking text), then press SELECT/
TRANSFER.
To make an entry a Speed Dial entry (cordless handset only)
When SPEED is blinking, press SELECT/TRANSFER, then dial a memory location
If you choose a memory location that is already assigned to a different entry in the directory, that entry will remain in the directory, but will not have a SPEED DIAL location.
To edit an entry
Press ^DIR until EDIT is blinking, then press SELECT/ TRANSFER.You can change the name and number (or dis- tinct ring
setting on the cordless handset) by following the steps described on pages
To delete an entry
Press ^DIR until ERASE is blinking, then press SELECT/ TRANSFER to display a confirmation screen (ERASE NO YES).
To delete the entry, press ^DIR to highlight YES, then
press SELECT/TRANSFER.
To abort the procedure and leave the entry intact, press CIDV to highlight NO, then press SELECT/TRANSFER.
28