![](/images/new-backgrounds/1310235/31023533x1.webp)
LANGUAGE
DIAL MODE: TONE
NOTES:
1.This sets the dial mode for both the handset(s) and the base.
2.During a power failure only the corded handset can be used to make and answer calls. The dial mode will default to pulse dial. To change to tone dial temporarily press *on the base (see page 17). When power is restored the dial mode will return to the pro- grammed setting.
Telephone Operation
Base settings
You can change settings to program how the telephone base works.
Follow the steps below to program the telephone base. To stop at any time, press CLEAR. If the phone rings, pro- gramming stops automatically so you can answer the call.
Choose base language
At this menu you can select the language used in all menus and screen displays.
•Press MENU to begin programming.
•Press CIDV or DIR^ until screen displays
LANGUAGE.
•Press SELECT to change current setting.
•Press CIDV or DIR^ to scroll through the available options of ENGLISH, ESPANOL and FRANCAIS.
•Press SELECT to select the displayed language and exit.
Choose dial mode
At this menu you can choose tone or pulse dialing.The factory default setting is TONE. Change this to PULSE only if you do not have
•Press MENU to begin programming.
•Press CIDV or DIR^ until screen displays DIAL MODE & setting.
•Press SELECT to change current setting.
•Press CIDV or DIR^ to display TONE or PULSE.
•Press SELECT to select displayed dial mode and exit.
Choose base ringer volume
The base ringer volume can be set to OFF, LOW, or HI, by adjusting the switch on the left side of the base.This switch affects only the base ringer volume; the cordless handset ringer volume remains unchanged.
13