AT&T E5909B user manual Changing feature options, Feature options

16

1.	SETUP
	Press until desired feature
	is heard (see list at right).

Answering System Operation

Changing feature options

Menu features can be changed to program how the answering system operates. Press SETUP repeatedly to hear each feature.When you hear the feature you want to modify press SKIP or REPEAT to change the setting.

Feature options	(Default settings underlined).
System announces:	Feature description:

2. SKIP or

REPEAT

Press until desired selection is heard.

3. SETUP

"Number of rings", current set- ting, then "To change the set- ting press SKIP or REPEAT; to continue setup, press SETUP" Options: 2 / 4 / 6 /Toll Saver

Choose number of rings before the sys- tem answers a call. When Toll Saver is active, the system answers after 2 rings if you have new messages, and after

4 rings if you have no new messages. When retrieving messages from a long- distant call, you may disconnect your call after 3 rings so that long-distance charges will not be charged.

Press to set selection and

move to next menu option.

- OR -

(Play/Stop)

Press to set selection and exit menu.

"Call screening", current set-	When on, you can hear callers leave mes-
ting, then "To change the set-	sages, or answer the call.
ting press SKIP or REPEAT; to
continue setup, press SETUP"
Options: On / Off
"Remote access code", cur-	Enter a two-digit number (10-99) for
rent setting, then "To change	remote access from another phone (see
the setting press SKIP or	page 43).
REPEAT; to continue setup,
press SETUP"
Options: (enter 2-digit code) 19
"Message alert tone", cur-	When on, the telephone beeps every 10
rent setting, then "To change	seconds when you have new messages.
the setting press SKIP or
REPEAT; to continue setup,
press SETUP"
Options: On / Off

NOTE: Press and hold SKIP or REPEAT to increase or decrease the remote access code number by 10.

39