Telephone settings
Handset settings
Key tone
The handset is programmed to beep with each key press. You can turn the key tone off, so there are no beeps when you press keys.
1.Press menu/select in idle mode to enter the main menu.
2.Press 
CID or 
DIR to scroll to >Settings, then press menu/select.
3.Press 
CID or 
DIR to scroll to >Key tone, then press menu/select.
4.Press 
CID or 
DIR to select >on or >off.
5.Press menu/select to save your preference.
Set date/time
KEY TONE >ON
The answering system announces the day of the week and time of each message received prior to playing it. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call (see About caller ID on page 33). However, the year must be set so that the day of the week can be calculated from the caller ID information.
Follow the steps below to set the month, date, year and time.
1.Press menu/select in idle mode to enter the main menu.
2.Press 
CID or 
DIR to scroll to >Settings, then press menu/select.
3.Press 
CID or 
DIR to scroll to >Set date/time, and then press menu/select.
4.Press 
CID or 
DIR to select the month, then press menu/select, or enter the
SET DATE 11/20/10
5.Press 
CID or 
DIR to select the day, then press menu/select, or enter the
6.Press 
CID or 
DIR to select the year, or enter the
7.Press 
CID or 
DIR to select the hour, then press menu/select, or enter the
using the dialing keys
8.Press 
CID or 
DIR to select the minute, or enter the
9.Press 
DIR or 2 to choose am, or press 
CID or 7 to choose menu/select to save. A confirmation tone sounds.
SET TIME 10:30 PM
pm. Press
note: If the date and time is not set when the message is recorded, the system announces “Time and date not set” before it plays the message.
13
