Getting started

Battery installation and charging

Battery installation

Install the battery as shown below.

Battery Pack BT162342/BT262342 2.4V 300mAh Ni-MH WARNING:DO NOT BURN OR PUNCTURE BATTERIES MADE IN CHINA CR0920

1. Plug the battery

2. Insert the supplied

connector securely

battery with the label

into the socket inside

this side up facing

the handset battery

up as indicated.

compartment, matching the color-coded label.

charge light

3.Align the cover flat against the battery compartment, then slide it upwards until it clicks into place.

4.Charge the handset by placing it face up in the telephone base or charger. The charge light is on when charging.

To replace the battery, press the tab and slide the battery compartment cover downwards. Lift out the old battery and disconnect it from the handset. Follow the instructions above to install and charge the new battery.

important information:

Use only the supplied rechargeable battery or replacement battery (model BT166342). To order,

visit our website at www.telephones.att.com or call 1 (866) 288-4268.

Page 10
Image 10
AT&T EL52351, EL52301, EL52201, EL52251, EL52401 Battery installation and charging, This side up facing, Charge light