AT&T EL52251, EL52351, EL52301 Handset locator, To start the paging tone, To stop the paging tone

Telephone operation

Handset locator

You can use the handset locator feature to find misplaced handsets.

To start the paging tone:

• Press /handset locator on the telephone base to start the paging tone on all handsets for 60 seconds.

To stop the paging tone:

• Press PHONE/FLASH, /SPEAKER, or any dialing key (0-9, or #) on the handset(s).

-or-

• Press /handset locator on the telephone base.

-or-

• Put the handset in the telephone base or charger.

notes:

• If you press OFF/Cancel or mute/delete on a handset,

the ringer of that handset is silenced but the paging tone continues on the other handsets.

•If a handset is accessing the answering system, on a call

(intercom call or outside call), or out of range, that handset does not beep when paged.

•You cannot use the handset locator feature while the telephone base is playing messages or the answering system is being accessed remotely.

23