Getting started
Battery installation and charging
Battery installation
Install the battery as shown below.
1. Plug the battery | 2. Insert the supplied |
connector securely | battery with the label |
into the socket | THIS SIDE UP facing |
inside the handset | up as indicated. |
battery compartment, |
|
matching the color- |
|
coded label. |
|
CHARGE light |
|
3.Align the cover flat against the battery compartment, then slide it upwards until it clicks into place.
4.Charge the handset by placing it face up in the charger. The CHARGE light is on when charging.
IMPORTANT INFORMATION:
To replace the battery, press the tab and slide the battery compartment cover downwards. Lift out the old battery and disconnect it from the handset. Follow the instructions above to install and charge the new battery.
Use only the supplied rechargeable battery or replacement battery (model BT166342). To order, visit our website at www.telephones.att.com,
or call 1 (800)
