wF3 SET:
This function allows each User and the Administrator to set up their own working environment. A separate profile for each is stored by the OSD and is activated according to the Username that was provided during Login.
To change a setting:
1.Double Click it; or move the highlight bar to it, then press [Enter]
2.After you select an item, a submenu with further choices appears. To make a selection, either Double Click it; or move the Highlight Bar to it, then press [Enter]. An icon appears before the selected choice to indicate which one it is. The settings are explained in the following table:
Setting | Function |
OSD HOTKEY | Selects which Hotkey activates the OSD function: [Scroll Lock] |
| [Scroll Lock] or [Ctrl] [Ctrl]. Since the Ctrl key combination may |
| conflict with programs running on the computers, the default is |
| the Scroll Lock combination. |
|
|
PORT ID | Allows you to position where the Port ID appears on the screen. |
DISPLAY | The default is the upper right corner, but you can choose to have |
POSITION | it appear anywhere on the screen. |
| Use the Mouse or the Arrow Keys plus Pg Up, Pg Dn, Home, |
| End, and 5 (on the numeric keypad with Num Lock off), to |
| position the Port ID display, then Double Click or press [Enter] to |
| lock the position and return to the Set submenu. |
| Note: The ID display position for each port on the installation is |
| set independently; the choice specified here only applies to the |
| currently active computer. |
|
|
PORT ID | Determines how long a Port ID displays on the monitor after a port |
DISPLAY | change has taken place. The choices are: User Defined - which |
DURATION | lets you select the amount of time (from 1 - 255 sec.); and Always |
| On - which displays the Port ID at all times. If you select User |
| Defined, key in the number of seconds, then press [Enter]. The |
| default is 3 Seconds. A setting of 0 (zero) disables this function. |
|
|
(Table continues on next page)
20 |
