Hotkey Beeper Control
The Beeper (see Activate Beeper, p. 23) can be Hotkey toggled On and Off. To toggle the Beeper, key in the following Hotkey combination:
1.Invoke Hotkey Mode with the [NumLock] +
2.Key in [B]
After you press [B], the Beeper toggles On or Off. The Command Line displays Beeper On or Beeper Off for one second; then the message disappears and you automatically exit Hotkey Mode.
Hotkey Summary Table
Combination | Action | |
[Num Lock] + | [Port ID] [Enter] | Switches access to the computer that corresponds |
|
| to that Port ID. |
|
|
|
| [T] [n] [Enter] | Sets the Auto Scan interval to n seconds - where n |
|
| is a number from 1 - 255. |
|
|
|
| [A] | Invokes Auto Scan Mode. |
|
|
|
| [←] | Invokes Skip Mode and skips from the current port |
|
| to the first accessible port previous to it.* |
|
|
|
| [→] | Invokes Skip Mode and skips from the current port |
|
| to the next accessible port.* |
|
|
|
| [↑] | Invokes Skip Mode and skips from the current port |
|
| to the last accessible port of the previous Station.* |
|
|
|
| [↓] | Invokes Skip Mode and skips from the current port |
|
| to the first accessible port of the next Station.* |
|
|
|
| [B] | Toggles the Beeper On or Off. |
*Once Skip Mode has been invoked, until you exit, you can keep on skipping simply by pressing an Arrow key. You don’t have to use the [NumLock] +
15 |
