Atlantis Land A02-RA ME01 manual Rear Ports, Cabling

Atlantis Land I-STORM ADSL ROUTER

2.3 The Rear Ports

	Port	Meaning
1	Power	Connect the supplied power adapter to this jack.
	(jack)
2	LAN	Connect a straight Ethernet cable to this port when
	(RJ-45
		connecting to a LAN such as an office or home
	connector)
		network.
		Connect the supplied crossover cable to this port
		when connecting to a LAN card.
3	RS-232	Connect the supplied RS-232 cable to this port when
	(port)
		connecting to a PC’s RS-232 port (9-pin serial port).
4	LINE	Connect the supplied RJ-11 cable to this port when
	(RJ-11	connecting to the ADSL/telephone network.
	connector)

2.4 Cabling

The most common problem associated with Ethernet is bad cabling or ADSL line. Make sure that all connected devices are turned on. On the front of the product is a bank of LEDs. As a first check, to verify that the LAN Link and ADSL line LEDs are lit. If they are not, verify that you are using the proper cables.

The product’s LAN port is wired just like a Network Adapter’s port. From the product directly to a PC, the cable should be an Ethernet crossover cable. From the product to a hub or switch, the cable should be an Ethernet straight through cable to a normal hub/switch port, or an Ethernet crossover cable to an uplink port.

Since the product cannot auto-detect whether your cable is correct or not, please make sure you are using the right cable to a PC or a Hub.

6