Dynamic Routing, Static Routing | Atlantis Land A02-RA ME01 instruction

Chapter 3 Configuration

Dynamic Routing

The dynamic routing function of the router can be used to allow the router to automatically adjust to physical changes in the network’s layout. The router uses the dynamic RIP protocol. It regularly broadcasts routing information to other routers on the network. Choose the protocol ─ RIP1, RIP2, or RIP1+RIP2 ─ you want the router to use to transmit / receive data on / from the network.

Static Routing

If you have another router with a LAN-to-LAN connection, you may create a static routing on the router that is the gateway to Internet. After you check the “Enable” radio button, the following figure will appear.

35

Image 41

Atlantis Land A02-RA ME01 manual Dynamic Routing, Static Routing

Contents

Storm Adsl Router With Firewall Built-in Page Copyright Atlantis Land I-STORM Adsl Router Table of Content Roubleshooting IntroductionPage An Overview of I-STORM Adsl Router Introduction Storm Adsl Router Features Package Contents Introduction Storm Adsl Router Application Front LEDs Using I-STORM Adsl Router Cabling Rear Ports Before Configuration Configuration Configuring PC in Windows 95/98/ME Configuration Configuring PC in Windows NT4.0 Configuring PC in Windows Configuration Configuring PC in Windows XP Configuration Device IP Network settings in LAN site IP Address Factory Default SettingsWeb Configurator Password Blank LAN and WAN Port Addresses Router/Bridge ModePassword Information from ISP Configuring with Web Browser in Router ModePPPoE PPTP-to-PPPoA 1 LAN Dhcp Server IP Address ISP 2 WAN Atlantis Land I-STORM Adsl Router PPPoE Authentication Protocol Default at Auto Configuration PPPoA Atlantis Land I-STORM Adsl Router RFC1483 PPTP-to-PPPoA Relaying Configuration IPoA DNS System Password Time Zone Upgrade Reboot Factory Setting Packet Filter Firewall Configuration Block Hacker Attack Block WAN Request/URL Filter 5 VPN Virtual Server Advanced Remote Config Static Routing Dynamic Routing Router/Bridge Mode System Status Status System Logs Device Info Dhcp Table Security Logs Help/ Logout Configuring with Web Browser in Bridge Mode 1 LAN 2 WAN System Upgrade Factory Setting Advanced Status Device Info Help Changing Password Firmware Upgrade Problems with the WAN Interface Problems Starting Up the I-STORM Adsl RouterProblems with the LAN Interface Problem Corrective Action Problems Connecting to a Remote Node or ISP Input Power LED IndicatorsPower Consumption Physical Dimension Product Support