Atlantis Land I-STORM ADSL ROUTER
16
3.3 Information from ISP Before you start configuring this device, you have to check with your ISP what kind of service is
provided such as PPPoE, PPPoA, RFC1483, IPoA, or PPTP-to-PPPoA Relaying.
Gather the information as illustrated in the following table and keep it for reference.
PPPoE VPI/VCI, VC-based/LLC-based multiplexing, Username,
Password, Service Name, and Domain Name System (DNS)
IP address (it can be automatically assigned from ISP or be
set fixed).
PPPoA VPI/VCI, VC-based/LLC-based multiplexing, Username,
Password, and Domain Name System (DNS) IP address (it
can be automatically assigned from ISP or be set fixed).
RFC1483 Bridged VPI/VCI, VC-based/LLC-based multiplexing and configure
this product into BRIDGE Mode.
RFC1483 Routed VPI/VCI, VC-based/LLC-based multiplexing, IP address,
Subnet mask, Gateway address, and Domain Name System
(DNS) IP address (it is fixed IP address).
IPoA VPI/VCI, IP address, Subnet mask, Gateway address, and
Domain Name System (DNS) IP address (it is fixed IP
address).
PPTP-to-PPPoA
Relaying
VPI/VCI, VC-based/LLC-based multiplexing, and Domain
Name System (DNS) IP address (it is fixed IP address).
3.4 Configuring with Web Browser in Router Mode Open the web browser, enter the local port IP address of this I-STORM ADSL ROUTER , which
default at 192.168.1.254, and click “Go” to get the login page.
No user name is required. The default password is left blank. If you have set a password, enter that and
click “OK” to continue.