Hardware Description and Configuration | Connect Tech 104 specs

Connect Tech FreeForm/PCI-104 User Manual

Hardware Description and Configuration

The following sections describe the function of all switches/jumpers and provide details on connector pinouts.

Jumpers and Switches

Slot Selection (RSW1)

This rotary switch selects a slot position in the PCI-104 stack. When mounting on a PCI adapter card, ensure slot one is selected.

Table 2: Slot Selection (RSW1)

Position	Slot
0,4	0
1,5	1
2,6	2
3,7	3

FPGA Configuration Settings (J1)

Jumper J1 is used to control FPGA configuration.

Table 3: FPGA Configuration Settings (J1)

FPGA waits for configuration over JTAG, using the cable it is connected to

FPGA reads configuration from SPI flash

FPGA is tri-state, program flash directly

Revision 0.00

8

Image 8

Connect Tech 104 user manual Hardware Description and Configuration, Jumpers and Switches, Slot Selection RSW1

Contents

FreeForm/PCI-104 Trademark Acknowledgment Limited Lifetime WarrantyCopyright Notice Customer Support Overview Contact InformationTelephone/Facsimile Email/Internet Table of Contents List of Tables List of Figures Features Introduction Jumpers /Switches Description Components Description Hardware Description and Configuration Jumpers and SwitchesSlot Selection RSW1 Position Fpga Configuration Settings J1 Slot Selection RSW1 Connector Pinouts External Power Connector Pinout P8 Signal Direction External Power Connection Gpio Header Pinout Signal Direction Gpio Header P7 Hardware Installation Software InstallationStandalone Operation Fpga Development Environment Fpga Configuration Launch ImpactPage Page Programming the Fpga Generating a Prom MCS File Page Revision Configuring the Fpga with the SPI Flash Configuring the Fpga / SPI flash AssociationPage Programming the Flash Elapsed time = Reference Design FunctionalityMemory Map Bar Local Address Space 0 Bar Implementation Local Address Space 1 Bar Specifications