Implementation, Local Address Space 1 Bar | Connect Tech 104

Connect Tech FreeForm/PCI-104 User Manual

Table 11: Local Address Space 1 (Bar 3)

Local Address	Contents	Access		Description

10000000	SPI Command	RW	SPI controller command register, once command is written
			operation begins

10000004	SPI Parameters	RW	There are four parameters, each one byte
			-	0x04: Param0
			-	0x05: Param1
			-	0x06: Param2
			-	0x07: Param3

10000008	SPI Status	R	SPI controller status register
			- Bit 0: Operation complete

1000000C	SPI Result	R	There are four results, each one byte
			-	0x04: Result0
			-	0x05: Result1
			-	0x06: Result2
			-	0x07: Result3

10000010 –	Un addressable	N/A	N/A
100000FC

10000100 –	Dual port memory	RW	256 Bytes of for flash page storage
100001FC

Implementation

Refer to the FreeForm/PCI-104 VHDL Reference Design Application Note for further information.

Revision 0.00

25

Image 25

Connect Tech 104 user manual Implementation, Local Address Space 1 Bar

Contents

FreeForm/PCI-104 Copyright Notice Limited Lifetime WarrantyTrademark Acknowledgment Contact Information Customer Support OverviewTelephone/Facsimile Email/Internet Table of Contents List of Figures List of Tables Introduction Features Components Description Jumpers /Switches Description Jumpers and Switches Hardware Description and ConfigurationSlot Selection RSW1 Position Fpga Configuration Settings J1 Slot Selection RSW1 Connector Pinouts External Power Connection External Power Connector Pinout P8 Signal Direction Gpio Header P7 Gpio Header Pinout Signal Direction Software Installation Hardware InstallationStandalone Operation Fpga Development Environment Launch Impact Fpga ConfigurationPage Page Programming the Fpga Generating a Prom MCS File Page Revision Configuring the Fpga / SPI flash Association Configuring the Fpga with the SPI FlashPage Programming the Flash Elapsed time = Functionality Reference DesignMemory Map Bar Local Address Space 0 Bar Local Address Space 1 Bar Implementation Specifications