Generating a Prom MCS File | Connect Tech 104 specification

Connect Tech FreeForm/PCI-104 User Manual

Generating a PROM (MCS) File

1) Double click Prom File Formatter in the Flows window.

2)The “Prepare PROM Files” dialog will appear. Ensur e that the following settings are selected: 3rd Party SPI PROM

MSC PROM File Format

3)Give the file a name, and click Next.

Revision 0.00

17

Image 17

Connect Tech 104 user manual Generating a Prom MCS File

Contents

FreeForm/PCI-104 Trademark Acknowledgment Limited Lifetime WarrantyCopyright Notice Contact Information Customer Support OverviewTelephone/Facsimile Email/Internet Table of Contents List of Figures List of Tables Introduction Features Components Description Jumpers /Switches Description Jumpers and Switches Hardware Description and ConfigurationSlot Selection RSW1 Position Fpga Configuration Settings J1 Slot Selection RSW1 Connector Pinouts External Power Connection External Power Connector Pinout P8 Signal Direction Gpio Header P7 Gpio Header Pinout Signal Direction Software Installation Hardware InstallationStandalone Operation Fpga Development Environment Launch Impact Fpga ConfigurationPage Page Programming the Fpga Generating a Prom MCS File Page Revision Configuring the Fpga / SPI flash Association Configuring the Fpga with the SPI FlashPage Programming the Flash Elapsed time = Functionality Reference DesignMemory Map Bar Local Address Space 0 Bar Local Address Space 1 Bar Implementation Specifications