Connect Tech 104 user manual Revision

Connect Tech FreeForm/PCI-104 User Manual

6)	Click “No” when asked if another device is to be ad ded.	Click “OK” to accept the setup.
7)	Double Click “Generate File” from the “iMPACT” proc	esses menu. The status will be reported in
	the console.

//*** BATCH CMD : setMode -pff

//*** BATCH CMD : setSubmode -pffparallel

//*** BATCH CMD : setAttribute -configdevice -attr fillValue -value "FF"

//*** BATCH CMD : setAttribute -configdevice -attr swapBit -value "true"

//*** BATCH CMD : setAttribute -configdevice -attr fileFormat -value "mcs"

//*** BATCH CMD : setAttribute -configdevice -attr dir -value "UP"

//*** BATCH CMD : setAttribute -configdevice -attr path -value

"C:\Data\Projects\FreeFormPCI104\hardware\logic\init_plx_GPIO25\/"

//*** BATCH CMD : setAttribute -configdevice -attr name -value "init_plx_GPIO25.cs" Total configuration bit size = 9371136 bits.

Total configuration byte size = 1171392 bytes.

//*** BATCH CMD : setCurrentDesign -version 0

//*** BATCH CMD : generate -spi

Swap bit can only be disabled in Hex file format only. 0x11dfc0 (1171392) bytes loaded up from 0x0

Using user-specified prom size of 2048K Writing file "C:\Data\Projects\FreeFormPCI104\hardware\logic\init_plx_GPIO25\//init_plx_GPIO25.mcs"

.

Writing file

"C:\Data\Projects\FreeFormPCI104\hardware\logic\init_plx_GPIO25\//init_plx_GPIO25.prm"

.

Revision 0.00 19