Configuring PC in Windows NT4.0 | Atlantis Land A02-RI_M02 instruction

Configuring PC in Windows NT4.0

Go to Start/Settings/ Control Panel. In the Control Panel double-click on Network and choose the Protocols tab.

Select TCP/IP Protocol and click Properties.

Select the Obtain an IP address from a DHCP server radio button and click OK.

8

Image 11

Atlantis Land A02-RI_M02 manual Configuring PC in Windows NT4.0

Contents

With 4 Fast Ethernet ports + BroadBand Interface Mistral Lan Router Isdn Table of Contents Introduction An overview of Mistral Lan Router Isdn Package contentsMistral Lan Router Isdn Features Page This Router Device Application Front LEDs Using Mistral Lan Router Isdn Cabling Rear portsPage Configuring PC in Windows 95/98/ME ConfigurationBefore Configuration Page Configuring PC in Windows NT4.0 Configuring PC in Windows Netscape Navigator Configuring with GUI programUsing Different Browsers for Mistral Lan Router Isdn Password Customize User Interface Dial-in Access for Off-Site Users Basic Internet Access Configuration via EwanInternet Access with Advanced Configuration Access to/from Remote Site e.g., Branch Office Click Ewan in the Configuration Menu Page Test Select I use Internet Access over Isdn and then click Next Basic Internet Access Configuration via Isdn Click Advanced Internet Access with Advanced ConfigurationClick Apply and Test Set Idle Timeout number. The range is from 0 to 3600 seconds Set the following parameters IP Configuration for Internet Access IP Routing Table Click Apply IP Address Translation Configuration Click Apply Delete a Set of IP Address Translation Add or Edit IP Address Translation Click Edit Static Dhcp ConfigurationAdd or Edit a Set of static private IP address Delete a Set of static private IP address Click Delete Remote Office Access by Isdn Remote Configuration Remote Account Name Remote Account Password Advanced Options for Remote Office Access Profiles Select Connection Profiles in the Menu Window Deleting Remote Office Access Profile Configuring a Dial-in User Profile Dial-in User Access Configuration Select Connection Profiles from the Menu Window Deleting Dial-in User ProfilesPacket Filtering Then IP Filtering Configuration window will appear Page Management How to View the Connection LogHow to Upgrade the Firmware Current Password New Password How to ResetHow to Change the Mistral LAN Router Isdn Manager Password Confirm Password Click Submit What if I Forget the Password? How many rules can be used in IP Filtering function? TroubleshootingWhat is NAT? How do I set up the Idle Time? What’s Data over Voice Channel? Why does the configuration lost from previous usage?Why can’t I use ICQ software under the device? Solution Why can’t I set up IP Filter function in GUI? Why can’t I connect successfully while I use Remote Dial-in? How can I get into Router what if I forgot the password? Support Support