LED Connections | Audible 2220 manual

2 - LED Connections

D1 through D8 represent SATA channels SATA1 through SATA8 respectively. The following diagrams describe the connector pin definitions for LED CON2 (disk activity), and CON3 (disk failure). CON1is not utilized by the RocketRAID 2220.

CON2: Hard Disk Activity (D1 through D8)

CON3: Hard Disk Failure (D1 through D8)

RocketRAID 2220 LED Guide

For more information about LED support, and installation guides for various chassis configurations, consult the RocketRAID 2220 LED Guide.

10

Image 10

Audible 2220 manual LED Connections

Contents

RocketRAID 2220 Sataii Host Adapter User’s Guide Revision Date March HighPoint Technologies, Inc Copyright Trademarks Table of Contents Creating an Array Deleting an Array Managing Events About this Guide Product FeaturesIntroducing the RocketRAID 2220 Host Adapter Understanding RAID Concepts and Terminology OCE, Olrm and the RocketRAID Online Capacity Expansion OCEOnline RAID Level Migration Spare disk RocketRAID 2220 Hardware Description/Installation JP1 and JP2 RocketRAID 2220 Hardware RocketRAID 2220 Adapter LayoutPort1- Port8 Speaker LED Connections Installing the RocketRAID 2220 Host Adapter Verifying Installation Single-RAID Cross Adapter RocketRAID 2220 Bios Utility Bios Command Overview RocketRAID 2220 Bios UtilitySettings Initializing Disks Creating RAID ArraysTo create an array Adding/Removing Spare Disks Single RAID -Cross AdapterPage Windows Driver Installation Installation Verification Default Parameters Installing the RAID Management Console/ Interface OverviewLogging On Software Interface Overview of commands/functions Overview of Function-menus tabs Creating an Array Deleting an Array Configuring Spare DisksTo delete an array To verify an array Recovering/Verifying ArraysVerifying an Array To perform OCE/ORLM on an array Device Management Changing Device SettingsMisc. Array/Device Options A.R.T Status Renaming an Array Configuring E-mail notificationManaging Events Viewing Logged Events To add a Recipient Managing TasksTo test E-mail notification Add a Scheduled Task Task Management New Task Wizard Delete a Scheduled Task Configuring Remote SystemsModify a Scheduled Task Add a Connection Delete a Connection Modify a ConnectionConnect to a Remote System System Configuration Disconnect Remote System Configuring Users and Privileges Add a User Delete a User Set PasswordSet Privilege Linux Driver Support Installation steps for Fedora Core Fedora Core 3 Linux installation OverviewInstall Fedora Linux Prepare the Driver Diskette Obtain the Driver Module Configure System to Automatically Load the DriverMounting and Partitioning the Device To uninstall the RocketRAID 2220 driver Uninstalling the DriverConfigure System to Mount Volumes during Startup Updating the Driver Install Red Hat Enterprise Linux Red Hat Enterprise 3 Overview Installing the RocketRAID 2220 driver for an Existing System Updating the Driver Installing Sles Linux on the RocketRAID 2220 Host Adapter SuSE Linux Enterprise Server Sles installation OverviewInstall Sles Linux Update Grub Installing the RocketRAID 2220 Driver on an Existing SystemInstall the Driver Module Configure System to Automatically Load the Driver Updating the Driver Contact Information Troubleshooting ChecklistCustomer Support Mail address support@highpoint -tech.com FCC Part 15 Class B Radio Frequency Interference statement European Union Compliance Statement