Audio-Technica AT-LP60-USB manual Tips For Better Performance, Specifications

Tips For Better Performance

Tips For Better Performance

•When opening or closing the turntable cover, handle it gently, moving it either at the center or equally from both sides.

•Do not touch the stylus tip with your fingers; avoid bumping the stylus on the turntable mat or a record’s edge.

•Clean the stylus tip frequently, using a soft brush with a back-to-front motion only.

•If you use a stylus cleaning fluid, use it very sparingly.

•Wipe the dust cover and turntable housing gently with a soft cloth. Use only a small amount of mild detergent solution to clean the turntable and dust cover.

•Never apply harsh chemicals or solvents to any part of the turntable system.

•Prior to moving the turntable, always unplug it from the AC outlet and fasten the tone arm on the tone arm rest with the vinyl twist-tie.

Specifications

Type	Belt drive turntable, fully automatic
Platter	Aluminum
Motor	DC servo-controlled
Speeds	331/3 RPM, 45 RPM
Wow and flutter	Less than 0.25% (WTD) @ 3 kHz (JIS)
Signal-to-noise ratio	>50 dB (DIN-B)
Cartridge	Integral Dual Magnet™ stereo cartridge with diamond stylus
Output level
Pre-amp “PHONO”	2.5 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”	150 mV nominal at 1 kHz, 5 cm/sec
Phono pre-amp gain	36 dB nominal, RIAA equalized
USB function
A/D, D/A	16 bit 44.1 kHz or 48 kHz USB selectable
Computer interface	USB 1.1 Compliant Windows XP, Vista or MAC OSX
Power	120V AC, 60 Hz, 3W
Dimensions	360.0 mm (14.17") W x 97.5 mm (3.84") H x 356.0 mm (14.02") D
Net weight	3 kg (6.6 lbs.)
Furnished accessories	Dual RCA (female) to 3.5 mm (1/8") mini-plug (male) stereo adapter cable; dual RCA (female) to 3.5 mm (1/8")
	mini-plug (female) stereo adapter cable; 45 RPM adapter; USB cable; recording software
Replacement stylus	ATN3600L

8