Avalon Stoves DVL Insert EF II Installation, for qualified installers only, Face Sizing, Height

	Installation		(for qualified installers only)		11
Face Sizing
	Face	Height	Width	Notes
	Rawhide	27”	35-3/4”
	Victorian	27”	35-3/4”
	Rosario	26”	35-3/4”
	Cambridge	25-7/8”	37-5/8”
	Craftsman	27-1/2”	36”
	Bungalow	27”	32-3/4”
	Classic Arched, Artisan	26-1/2”	34-3/4”	Side begins arch 3-1/2” below top - 45” radius
	Metropolitan	26-1/2”	34-3/4”
	Architectural Series	27-7/8”	33-5/8”
	Discovery	26’	35-3/4’
	Wilmington	27”	36-1/8”

Face Mounting Brackets – Arched, Artisan, Metropolitan, Victorian Lace

Some Arched, Artisan, Metropolitan and Victorian Lace Faces include old brackets that will not mount to the heater (see illustration below). For these faces, make sure to use the new mounting brackets (either included with the heater or available through your dealer - SKU 225-20054).

WARNING: When attaching the Victorian Lace Face, tightening the screws may damage the face – simply

do not over-tighten the screws. Over- tighten the screws until they contact the face.

New Brackets Old Brackets

Install the face mounting brackets with the included nuts.

NOTE: The brackets

install with this pair of

closely spaced flanges at

the top.

NOTE: The brackets install into the

lower pair of holes on the insert.

© Travis Industries 4080123 100-01174_002