20 | Finalizing the Installation |
Glass Frame Removal and Installation
Warning: The appliance must be completely cool before removing the glass.
Warning: Do not strike or slam the glass.
Note: If using a Victorian Lace or Bungalow face, attach the arch covers after installing the glass.
Open the four latches holding the glass a frame in place (start with the two below the glass) - follow the directions shown
to the right.
| Latch |
Top of | Push in on |
the latch. | |
Firebox |
|
Glass
Glass Frame
Lift the glass frame up b and pull it forward to
remove. NOTE:
You may need to lift the glass frame while re- attaching.
Re-Attaching the Glass Frame:
NOTE:
Replace the cove covers for those faces using them.
Twist 1/4 turn.
The latch will then disengage from the latch bracket.
a)Hang the glass frame on the firebox.
b)While holding in place, attach the upper latches (follow the instructions to the right in reverse).
c)Lift the glass frame slightly and attach the lower latches.
© Travis Industries | 4080123 |