Avalon Stoves DVL Insert EF II Optional Equipment for qualified installers only, 4080123

42 Optional Equipment (for qualified installers only)

4Attach the rheostat assembly and wiring harness as shown below.

NOTE: Make sure the grounding wire remains attached (if applicable).

d

Use the included wire nut to connect the wire leading from the rheostat to the remaining wire leading from the accent light.

c

Attach the quick- connect from the accent light to the quick-connect on the rheostat wiring harness.

aDisconnect the molex connector leading to the power cord.

e b

Slide the rheostat assembly into place and secure with the included nuts.

Attach the two molex connectors on the rheostat wiring harness to the power cord and the molex connector on the appliance.

Make sure all wiring does not contact the

firebox or blower (use wireties if necessary).

5Restore the firebox to the correct configuration (replace the burners, etc.).

OFF LOW HIGH

Accent Light Operation

Turn the dial all the	Turn the dial 180°	The high position
way counter-clockwise	clockwise until the light	is all the way
until it clicks off.	begins to glow.	clockwise.

NOTE: The accent light responds best when turned to high, then turned down to the desired light level.

© Travis Industries 4080123 100-01174_002