Using the Telephone:
5.1 Making a Call
Dialing: Press 
and dial the phone number.
Pre-dialling: 
Enter the phone number and press 
. You can use pre-dialling to chain telephone numbers from different lists. Press Options, select one of the lists with the arrow keys and OK. Select a telephone number from the list. A long press on the hook key will add the number to the number pre-dialled before.
∙In pre-dialling, if the input cursor is positioned behind the telephone number, the number to be chained will be suffixed to that phone number. If the input cursor is at any other point, the number to be chained will be prefixed to the phone number.
Correcting an entry during pre-dialling:
: deleting individual digits; press for a longer period: deletes the whole phone number.
∙Long key press on “#“ inserts P (for pause) in the pre-dial-mode.
Making a Call from the Last Number Redial List
Selection: press the 
-softkey and then one of the arrow keys (several times if necessary) with the telephone in an idle state. The last 10 phone numbers dialed are then displayed. The beginning/end of the number redial list is marked by a dashed line.
Dialing: Press 
, the selected phone number is dialed.
Pre-dialling: If you press 
for a longer period, the selected phone number is entered into the pre-dial mode. Digits
can be added to the displayed phone number, as required (see Making a Call). To dial, press 
. The pre-dial mode is terminated by pressing Esc.
You can call directly from the redial list or transfer a phone number to the telephone book (see Menu: Redial list
3701 Phone | Page 23 |
IP Office | 15-601083 Issue 01c (03 October 2008) |
