6.8 Menu: System
Registration Code
The phone can be manually registered on up to 5 different DECT systems. Before you can make a call via the DECT system, the phone has to be registered to the system. A system ID and registration code are necessary for the registration process. Ask the system administrator for the valid registration code. When the phone is not subscribed to the system the display will show ”Please, subscribe”.
Note
∙This is for information only. Please contact your system administrator to register the phone.
All settings in this chapter are started by pressing the softkeys:
Menu System OK
Registering the Telephone to the DECT System
Subscription OK >Subscribe HS< OK
or
Use
or
Cancel OK
The following entries must be made when logging on:
∙
∙Use
∙Enter name : give the name of the DECT system to which you are registering. This will be shown on the idle display. For information concerning the entry of characters, see Entering Characters/Names 31 .
∙Internal No. : the phone number, assigned to your DECT phone can be entered here (ask your system administrator for the phone number).
Selecting the DECT System
Subscription OK select a System Options Select OK
If the phone has been registered to several DECT systems, then you can select which one the phone is to use. Select the system via the arrow keys before confirming ”Select”. By choosing Options Select, the function automatic search is disabled. The selected system is shown in the idle display.
Automatic Search System
Subscription OK Auto. Search OK
If you have registered your phone with several DECT systems and this function is active (” ”), then the phone will automatically select one of the systems. Thus, your phone is automatically
3701 Phone | Page 36 |
IP Office |