S-Registers
Issue 2 November 1996 C-19
Register: S12
Description: The value in this S-register determines the minimum
delay required immediately before and after entering
the escape sequence (guard time). It also determines
the maximum interval allowed between entering each of
the three consecutive characters of the sequence.
Range of Values: Value may be 000 through 255 fiftieths (0.02) of a
second; factory-default value is 50 fiftieths of a second
(1 second).
Storable: no
Comments: If the value in this S-registe r is set to 0, timing is not a
factor in escape sequence recognition.
See Also: "From Data Mode to Command Mode and Back" on
page 3-10 and the +++ command on page A-3.
Register: S13 — not used.
Table C-1. Labels Used in S-Registers — Continued
Label Description