Installation
If You Are Using a PC
PC communications packages provide the capability of configuring the 8400B Plus Data Module automatically. When using a PC communications package with the 8400B Plus Data Module, there are two items to note:
1.The PC communications package should be configured to work with a Hayes Smartmodem 2400 or Hayes compatible modem.
2.The dialing method of the PC communications package should be set to Tone for data calls and Pulse for voice calls.
Many PC communications packages provide the possibility of writing script or command files. These files can then be run to execute a sequence of commands that will configure your system, or even provide an automatic
Since there is such a diversity of functionality among the many PC communications packages available, refer to the user’s manual of the package for specific details about its use.
For more information about the AT interface and operation of the 8400B Plus Data Module, refer to Chapter 3.
If You Are Using a Dedicated Terminal
When a dedicated terminal is used with an 8400B Plus Data Module, you must control the operation of the 8400B Plus Data Module. In a way, you are acting as a PC communication package. To do this, you must understand the operation of the 8400B Plus Data Module. Refer to Chapter 3 for information on the configuration and operation of your 8400B Plus Data Module.
