•The SOLO button has one LED. It will light when pressed, indicating that the selected Channel or Group is now being auditioned with all other Channels being muted. Two Solo modes are available.
•The MUTE button has no LED in it. Pressing the MUTE but- ton with a Channel selected will cause the Channel’s lower (yellow) LED to light.
There is also one special button combination, the RECALL button followed by the MUTE button. When used together this combination serves a twofold function:
•If there is a sudden change in the audio volume coming through the monitor system, this button combination silences all audio channels instantly.
•When starting from scratch to create a mix, use this func- tion to set all sixteen channels to zero volume and all pans to the center settings.
Mute
In Recall
Mode All
Volumes
Zero
All Volumes Zero
Select
Mute
15 16
Note: The text on the right side of the Personal Mixer label reads “In Recall Mode All Volumes Zero” as a reminder that this function is always available.
Basic Navigation
When the system is powered up, Preset 1 is automatically selected. On the Personal Mixer, one Channel is always selected for editing. You can tell that a Channel is selected because the upper LED in its button is lit.
The sixteen Channel buttons have two LEDs in each, an upper and a lower. The red upper LED indicates that the Channel is selected; you can change its volume and panning. You can also solo or mute the channel using the dedicated SOLO and MUTE buttons on the Personal Mixer surface.
The upper LEDs will also light in combination if a track is linked or is part of one of the three available Groups. (More info on Groups appears later in this document.)
17
