LEDs in the Volume section of the mixer surface will indicate the level in real time. There are twelve LEDs in the Volume indicator, each capable of displaying two levels, for a total of
When a Channel is selected, the current volume is instantly indicated on the LEDs. When no LEDs are lit, Channel volume is at its minimum setting.
Pan and Volume Controls
To make changes to a Channel:
•Select a Channel by pressing its numbered
•Rotate the VOLUME knob to the right to increase the volume, to the left to lower the volume
•While the Channel is still selected, you can also change the Pan setting. Rotate the PAN knob left or right to change the position of the Channel in the stereo field.
Pan LEDs
The Pan indicator is made up of five LEDs. The center LED is green. The LEDs on either side of center are red. As you turn the PAN knob, the LEDs will light in various combinations to provide the maximum number of position indicators with the fewest number of lamps. At either end of the display only one LED will be lit to indicate that the Channel is panned full left or right.
When using linked channels (stereo inputs), the LEDs light in different patterns, using a pair of LEDs on either side of the display to indicate the width of the stereo field. When the stereo image has been collapsed to mono, only the center green LED will be lit. In this case the stereo input will be heard as mono.
Mixing
Start creating a monitor mix by selecting the first Channel you want to hear.
21
