26AXIS 210/210A/211/211A - Audio (AXIS 210A/211A only)
If there are problems with the sound input being too low or high, adjust the input gain for the microphone attached to the AXIS 210A/211A.
Audio Output
If the sound from the speaker is too low or high, adjust the output gain for the active speaker attached to the AXIS 210A/211A.
When satisfied with the settings, click Save, or click Reset to revert to the previously saved settings.
Advanced Audio Settings
The Audio Quality Settings allow you to
Enable speech filter improves the sound quality when the microphone is placed close to the person talking and can also help reduce background noise. The filter cuts the lowest and the highest frequencies. The bypass frequency range is approximately 250Hz to 3700Hz (measured at
Enable echo cancellation - If audio from the speaker is captured by the microphone, this will produce an echo. Enable this option to reduce acoustic echoing.
Noise canceling is a way of reducing the background noise when there is no useful audio present. A typical application could be that the camera is set up in a noisy environment, and you are only interested in hearing the sound from the AXIS 210A/211A when someone is speaking close to the microphone.