42AXIS 210/210A/211/211A - System Options
Link-Local Address
This is enabled by default and assigns the AXIS 210/210A/211/211A an additional IP address for use with UPnP™. The AXIS 210/210A/211/211A can have both a
HTTP
The default HTTP port number (80) can be changed to any port within the range
HTTPS (AXIS 210A/211A only)
The default HTTPS port number (443) can be changed to any port within the range
NAT Traversal
Use NAT traversal when your AXIS 210/210A/211/211A is located on an intranet (LAN) and you wish to make it available from the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT router will be forwarded to the network camera.
Enable/Disable - When enabled, the AXIS 210/210A/211/211A will attempt to configure port mapping in a NAT router on your network, using UPnP™.
Use manually selected NAT router - Select this option to manually select a NAT router. Enter the IP address for the router in the field provided.
If a router is not manually specified, the AXIS 211A Network Camera will automatically search for NAT routers on your network. If more than one router is found, the default router will be selected
Alternative HTTP port - Select this option to manually define an external HTTP port. Enter the port number in the field provided. If no port is entered here a port number will automatically be selected when NAT traversal is enabled.
For more information, please see the online help
RTSP
The RTSP protocol allows a connecting client to start an