Axis Communications 211a Motion Detection, 36AXIS 210/210A/211/211A - Event Configuration

36AXIS 210/210A/211/211A - Event Configuration

Motion Detection

Motion detection is used to generate an alarm whenever movement occurs (or stops) in the video image. A total of 10 Include and/or Exclude windows can be configured.

•Included windows target specific areas within the whole video image

•Excluded windows define areas within an Include window that should be ignored (areas outside Include windows are automatically ignored)

Once configured, the motion detection windows will appear in the list of available triggers, for triggering events. See “How to set up a triggered event” on page 34.

Note: Using the motion detection feature may decrease the camera’s overall performance.

Configuring Motion Detection

1.Click Motion Detection in the Event Configuration menu.

2.Click the Configure Included Window radio button.

3.Click New.

4.Enter a descriptive name under Window name.

5.Adjust the size (drag the bottom right-hand corner) and position (click on the text at the top and drag to the desired position).

6.Adjust the Object size, History and Sensitivity profile sliders (see table below for details). Any detected motion within an active window is then indicated by red peaks in the Activity window (the active window has a red frame).

7.Click Save.

To exclude parts of the Include window, click the Configure Excluded Windows button and position the Exclude window as required, within the Include window.