Axis Communications 243Q Blade user manual Scheduled event, How to set up a scheduled event

AXIS 243Q Blade - Event configuration 34

The Include post-trigger buffer option contains images from the time immediately after the trigger. Configure as for pre-trigger.

Note: If the pre- or post-buffer is too large for the AXIS 243Q Blade's internal memory, the frame rate is reduced and individual images may be missing. If this occurs, an entry will be created in the unit's log file.

The Continue image upload (unbuffered) option enables the upload of images for a fixed length of time. Specify the length of time for the uploaded recording, in seconds, minutes or hours, or for as long as the trigger is active. Finally, set the desired image frequency to the maximum (the maximum possible) or to a specified frame rate. The frame rate will be the best possible, but might not be as high as specified, especially if uploading via a slow connection.

Scheduled event

A Scheduled event can be activated at pre-set times, in a repeating pattern on selected weekdays.

How to set up a scheduled event

This example describes how to set the video server to send an email notification with saved images from a set time:

1.Click Add scheduled... on the Event Types page.

2.Enter a descriptive name for the event, such as Scheduled email.

3.Set the priority (High, Normal or Low).

4.Set the Activation Time parameters (24h clock) when the event should be active, for example, start on Sundays at 13.00 hours with a duration of 12 hours.

5.Set the When Activated... parameters which determines what the video server should do at the specified time - for example, send uploaded images to an email address.

6.Click OK to save the Event in the Event Types list.

Please see the online help for descriptions of each available option.