32AXIS 243SA - Event configuration
Event configuration
This section describes how to configure AXIS 243SA for alarm handling. Various actions can be configured to run when certain types of events occur.
Event type | A set of parameters describing how and when the video server is to perform certain actions | |
|
|
|
Triggered Event (see page 33) | - the circumstances that start an event | Example: at a signal from an external device, such as a |
| door switch or a motion sensor | |
|
| |
|
|
|
Scheduled Event (see page 34) | - the circumstances that start an event | Example: at a |
|
|
|
Event servers
Event Servers are used for receiving uploaded image files and/or notification messages. To set up an Event server for your AXIS 243SA, go to Setup > Event Configuration > Event Servers and enter the required information according to the selected server type.
Server type | Purpose | Information required |
| ||
|
|
|
|
| |
| • | receives uploaded images | • | Descriptive name of your choice | |
FTP Server |
|
| • Network address (IP address or host name) | ||
|
| • User Name and Password (to FTP server) | |||
|
|
| |||
|
|
| • | Port number |
|
|
|
|
|
| |
HTTP Server | • | receives notification messages | • | Descriptive name of your choice | |
• | receives uploaded images | • | URL (address) |
| |
|
| ||||
|
|
|
|
| |
| • | receives notification messages | • | Descriptive name of your choice | |
TCP Server |
|
| • | Network address (IP address or host name) | |
|
|
| • | Port number |
|
|
|
|
| ||
For details on each setting, please refer to the online help | available from each web | ||||
page. |
|
|
|
|
|
Note: The images in
When the setup is complete, the connection can be tested by clicking the Test button (the test takes approximately 10 seconds).
