Terminal Connectors | Axis Communications AXIS 233D specification

52AXIS 233D - I/O terminal Connectors

I/O terminal Connectors

The AXIS 233D Network Dome Camera has 3 (8 pin) connectors. The inputs/outputs are used in applications for, e.g. event triggering, time lapse recording, alarm notification via email, picture storage to FTP locations.

Power/Audio

Outputs

Network connector

Inputs

•Power, auxiliary power, GND and audio.

•4 solid state relay outputs - These can drive a maximum load of 50V DC at 500mA directly or heavier loads by connecting additional relay circuitry. If the output is used with an external relay, a diode must be connected in parallel with the load for protection against voltage transients.

•4 alarm inputs - Used for connecting external alarm devices and triggering images for specific alarm-based events. The input is typically connected to a motion detector or any other external security device, and images can be uploaded whenever the detector is activated. A maximum 40V DC is allowed on the inputs.

Image 52

Axis Communications AXIS 233D user manual Terminal Connectors

Contents

Axis 233D About This Document Safety Notice Battery Replacement Table of contents Axis 233D Key Features Product Overview Overview Status LED Indicator Color Description Using the Network Dome Camera Accessing the Axis 233D Axis 233D Using the Network Dome Camera Click-in-image movement Area ZoomPan/Tilt/Zoom Controls Pan/Tilt/Zoom Control Queue Axis 295 Video Surveillance Joystick Stream Types Video StreamsMotion Jpeg MPEG-4 protocols and communication methods How to stream MPEG-4 RTP/RTSP/HTTP or RTP/RTSP/HTTPS Axis Media Control Other methods of accessing the video streamOther MPEG-4 clients Accessing the Setup Tools Configuring the Network Dome CameraOverview of the Setup Tools Video & Image Settings Image Settings Overlay Settings Overlay Image SettingsGo to Setup Video & Image Overlay Image Video Stream Advanced Camera Settings Privacy Mask Low Light Behavior MPEG-4 Settings Audio Settings Audio modeAudio Audio Channels Audio Input Audio Output Advanced Audio Live View Config Layout View Check Show Custom Link Action Buttons Viewer Settings Html Examples External Video Sequence ModeWorking with External Video Sources Dome Configuration Preset PositionsGuard Tour Osdi Zones Advanced Event Configuration Event Servers How to set up a triggered event Event TypesTriggered Event Click Add triggered on the Event types Pre-trigger and Post-trigger buffers Scheduled Event How to set up a scheduled eventClick Add scheduled on the Event types Motion Detection Port Status History Sensitivity User Settings check the corresponding checkboxes to enable System OptionsSecurity IP Address Filtering Https 802.1X Network Admission Control Authentication process Date & Time Axis 233D System Options IP Address Configuration Network Basic TCP/IP SettingsServices Network Advanced TCP/IP Settings DNS ConfigurationNTP Configuration Host Name Configuration Link-Local IPv4 Address NAT traversal port mapping FTP Network Traffic QoS Settings QoS Quality of serviceSmtp email Maintenance UPnPBonjour Ports & devices Default router Subnet mask System time Configuration SupportAdvanced Logs & Reports Resetting to the Factory Default Settings Resetting to Factory Default SettingsAbout Terminal Connectors Power connections Terminal connector blocks Pin Function Description Power/Audio Schematic Diagram Axis 233D I/O connectors and power Troubleshooting Checking the Firmware Updating the Firmware Emergency Recovery Procedure LED Indicator flash routine Sequence Support Symptoms, Possible Causes and Remedial Actions Using ARP Ping Snapshot images Technical Specifications Lens Shutter time System integration General performance considerations Optimizing your system Frame rates Bandwidth Index 802.1x Radius Axis 233D