54 AXIS 233D - I/O terminal Connectors

I/O terminal connector blocks
Power/Audio
1Power AC 18 - 30 VAC max 25VA power consumption.
2Power
AC/DC+
18 - 30 VAC max 25VA power consumption.
-or-
22 - 40 VDC max 20W power consumption.
3GND Ground
4 Vout 12V/200mA
Vout can be used to power auxiliary equipment,
max 200mA.
5GND Ground
6Line OUT Mono audio output (line level), which can be connected
to an active speaker with built-in amplifier.
7GND Ground
8Mic/Line IN Input for a mono microphone or line level mono signal.
Output
1Out1_1_relay On the external device output terminals (e.g. Out1_1 and
Out1_2) there is no distinction between positive and neg-
ative. The terminals use a photocoupler and are electri-
cally isolated from the other internal circuitry.
The maximum load should not exceed 500mA and the
maximum voltage should be not more than 50V DC.
Note: Connecting AC to the Output will damage the unit.
2Out1_2_relay
3Out2_1_relay
4Out2_2_relay
5Out3_1_relay
6Out3_2_relay
7Out4_1_relay
8Out4_2_relay
Input
1In1_anode(+) Electrically isolated from the chassis and connectors,
these inputs can be supplied from an external DC voltage
or pin 4 (Vout) of the Power/Audio Connector and GND.
(3.3 - 40VDC allowed on the inputs)
The terminals use a photocoupler and are electrically iso-
lated from the other internal circuitry.
Note: There is a distinction between anode and cathode
when making connections!
2In1_cathode(-)
3In2_anode(+)
4In2_cathode(-)
5In3_anode(+)
6In3_cathode(-)
7In4_anode(+)
8In4_cathode(-)
Pin Function Description