Power connections | Axis Communications AXIS 233D specs

AXIS 233D - I/O terminal Connectors 53

Power connections

Power can be supplied to the camera by the following methods:

•Connect the supplied indoor power adapter to the power connector block and attach it to the camera casing. Note that this indoor power adapter provides power for the camera only.

•Connect an outdoor power supply to the power connector block and attach it to the camera casing. For information on available outdoor power supplies, please visit the Support pages at http://www.axis.com/techsup/

The power connector block supports both AC and DC input power.

!IMPORTANT! - When using a DC power supply (included with this product), it is very important that it is connected correctly to the power block. Make sure the wire labeled with “+” is connected to pin 2 and the remaining wire GND to pin 3. With an AC power supply either wire can be connected to pin 1 or 2.

Image 53

Axis Communications AXIS 233D user manual Power connections

Contents

Axis 233D About This Document Safety Notice Battery Replacement Table of contents Axis 233D Product Overview Key Features Overview Color Description Status LED Indicator Accessing the Axis 233D Using the Network Dome Camera Axis 233D Using the Network Dome Camera Area Zoom Click-in-image movementPan/Tilt/Zoom Controls Pan/Tilt/Zoom Control Queue Axis 295 Video Surveillance Joystick Motion Jpeg Video StreamsStream Types MPEG-4 protocols and communication methods RTP/RTSP/HTTP or RTP/RTSP/HTTPS How to stream MPEG-4 Other MPEG-4 clients Other methods of accessing the video streamAxis Media Control Overview of the Setup Tools Configuring the Network Dome CameraAccessing the Setup Tools Image Settings Video & Image Settings Overlay Image Settings Overlay SettingsGo to Setup Video & Image Overlay Image Video Stream Privacy Mask Advanced Camera Settings Low Light Behavior MPEG-4 Settings Audio mode Audio SettingsAudio Audio Channels Audio Output Audio Input Advanced Audio Layout Live View Config Check Show Custom Link View Action Buttons Html Examples Viewer Settings Working with External Video Sources Sequence ModeExternal Video Preset Positions Dome ConfigurationGuard Tour Osdi Zones Advanced Event Servers Event Configuration Event Types How to set up a triggered eventTriggered Event Click Add triggered on the Event types Pre-trigger and Post-trigger buffers Click Add scheduled on the Event types How to set up a scheduled eventScheduled Event Motion Detection History Sensitivity Port Status System Options User Settings check the corresponding checkboxes to enableSecurity IP Address Filtering 802.1X Network Admission Control Https Date & Time Authentication process Axis 233D System Options Services Network Basic TCP/IP SettingsIP Address Configuration DNS Configuration Network Advanced TCP/IP SettingsNTP Configuration Host Name Configuration NAT traversal port mapping Link-Local IPv4 Address Network Traffic FTP Smtp email QoS Quality of serviceQoS Settings UPnP MaintenanceBonjour Ports & devices Default router Subnet mask System time Support ConfigurationAdvanced Logs & Reports About Resetting to Factory Default SettingsResetting to the Factory Default Settings Terminal Connectors Power connections Pin Function Description Power/Audio Terminal connector blocks Schematic Diagram Axis 233D I/O connectors and power Checking the Firmware Updating the Firmware Troubleshooting Emergency Recovery Procedure Sequence LED Indicator flash routine Support Using ARP Ping Symptoms, Possible Causes and Remedial Actions Snapshot images Lens Technical Specifications Shutter time System integration Optimizing your system General performance considerations Bandwidth Frame rates 802.1x Index Radius Axis 233D