AXIS M3011 - Video Streams
AXIS Media Control (AMC)
AXIS Media Control (AMC) in Microsoft Internet Explorer in Windows is the recommended method of accessing live video from the network camera.
The AMC control panel can be used to configure various video and audio settings. Please see the AMC user manual included in the tool for more information.
The AMC control panel is automatically installed on first use, after which it can be configured.
Open the AMC Control Panel from:
•Windows Control Panel (from the Start menu)
•Alternatively,
Note:
AXIS M3011 does not support audio.
Motion JPEG
This format uses standard JPEG still images for the video stream. These images are then displayed and updated at a rate sufficient to create a stream that shows constantly updated motion.
The Motion JPEG stream uses considerable amounts of bandwidth, but provides excellent image quality and access to every image contained in the stream. The recommended method of accessing Motion JPEG live video from the network camera is to use the AXIS Media Control (AMC) in Microsoft Internet Explorer in Windows.
Alternative methods of accessing the video stream
You can also access video/images from the network camera in the following ways:
•Motion JPEG server push (if supported by the client, Firefox, for example). This option maintains an open HTTP con- nection to the browser and sends data as and when required, for as long as required.
•Still JPEG images in a browser. Enter the path -
•Windows Media Player. This requires AMC and the
•Unicast via RTP:
•Unicast via RTSP:
•Unicast via RTSP, tunneled via HTTP:
•Multicast:
•To access the video stream from QuickTime™ the following paths can be used:
•
•
Notes:
•The network camera supports QuickTime 6.5.1 and later.
•QuickTime adds latency to the video stream (up to 3 seconds).
•It may be possible to use other players to view the
•<ip> = IP address
•<codec> = h264 or mpeg4. The default codec is H.264.
13
