B&B Electronics 232SDD16 manual Isolated Solid State Input

Figure 4.4 - Isolated Solid State Input

Figure 4.6 - Isolated Solid State Output

Digital Outputs

Digital outputs are used to turn external devices on or off. Digital outputs are CMOS/TTL compatible and operate between 0Vdc and +5Vdc. Outputs can be used to control solid state output modules, CMOS and TTL logic circuits. Caution must be taken not to exceed the power capability of the outputs. Refer to the output specifications in Chapter 1.

Setting an output line to a "1" forces the output HIGH, and setting an output line to a "0" forces the output LOW.

Figures 4.5 - 4.6 show examples of some typical output interfaces.

Figure 4.5 - Solid State Output

232SDD16-1005 Manual	19	20	232SDD16-1005 Manual
B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350		B&B Electronics -- PO Box 1040 --	Ottawa, IL 61350
PH (815) 433-5100 -- FAX (815) 433-5104		PH (815) 433-5100 -- FAX (815) 433-5104