Bags and Gloves E-9220T Booting from the SUP CD:

Insert the bootable CD into the CD drive.

Exit the BIOS Setup utility and let the server continue to boot.

Select the Boot menu, then press ENTER. The Boot menu opens.

Chapter 3: Maintaining Your Server

Booting from the SUP CD:

1 Restart your server, then press F2 when the Gateway logo screen appears during startup. The BIOS Setup utility opens.

3 Select the CD drive on the Boot menu, then press ENTER. The server will now boot to the CD drive. If the CD drive is not detected, see “CD or DVD drive” on page 79.

6 After the updates are completed, restart your server, then press F2 when the Gateway logo screen appears during startup. The BIOS Setup utility opens.

7 Use the down arrow key to select the Boot menu, then press ENTER. The Boot menu opens.

8 Select your normal boot drive from the list, then press ENTER. The server will now boot normally.

22	www.gateway.com

Contents

Page Contents Checking Out Your Gateway Server Installing Components Troubleshooting Safety, Regulatory, and Legal Information Page Checking Out Your Gateway Server •Locating drives, ports, jacks, and controls •Locating system board components •Getting help Front Back Interior System board Getting Help Gateway Web site Setting Up Your Server •Using your server safely •Starting and turning off your server •Restarting (rebooting) your server •Setting up the operating system Setting up the hardware Protecting from power source problems Starting your server To start the server: Selecting the boot device To select which device your server boots from: Understanding the power-on self-test Turning off your server To turn off the server: Setting up the operating system Initial hardware settings Page Maintaining Your Server •Caring for your server •Preparing for system recovery •System administration •Using Active Management Technology Caring for your server Cleaning your server Cleaning tips Cleaning the keyboard Cleaning the screen Cleaning the tape drive Preparing for system recovery Recording the BIOS configuration To record your BIOS configuration: System administration Gateway Server Manager Server security Using BIOS security passwords To set the BIOS security passwords: Option Description Creating a DOS-bootableSystem Update Package (SUP) CD To create a DOS-bootableSUP CD: Booting from the SUP CD: Using Active Management Technology To enable Active Management Technology (AMT): To configure and access Active Management Technology (AMT): Page Page Using your System Companion CD Installing Components •Opening and closing the server case •Installing and replacing major components Preparing to install components Selecting a place to work Gathering the tools you need Preventing static electricity discharge Accessing the internal components Opening the server case To open the server case: Page Removing the bezel assembly To remove the bezel assembly: Removing the processor air duct To remove the processor air duct: Installing the processor air duct To install the processor air duct: Page Installing the bezel assembly To install the bezel assembly: Closing the server case To close the server case: Installing drives Installing or replacing a fixed or removable-mediadrive To install a drive in an external drive bay: Page To install a hard drive in an internal drive bay: Installing or replacing a hard drive Configuring your onboard RAID solution Configuring the onboard SATA RAID solution To launch the SATA RAID BIOS console: To configure the SATA RAID solution: Installing memory To install or replace memory: Installing PCI expansion cards To replace, add, or reseat a PCI expansion card: Page Page Page Replacing the processor To replace the processor: Page Page Replacing a power supply module To replace a power supply module: Page Replacing a fan To replace a front fan: To replace a back fan: Page Replacing the CMOS battery To replace the battery: Page Replacing the system board To replace the system board: Page Page Page Using the BIOS Setup Utility •Opening the BIOS Setup utility •Updating the BIOS •Resetting the BIOS settings to their factory defaults •Resetting the BIOS passwords Opening the BIOS Setup utility To open the BIOS Setup utility: Updating the BIOS To update the BIOS: Resetting the BIOS To reset the BIOS: Resetting BIOS passwords To clear the BIOS password(s): Page Troubleshooting •Interpreting error messages and codes •Troubleshooting •Getting telephone support and training Safety guidelines Error messages Invalid password Memory errors were detected while the system started up Memory size error Missing operating system System Event Log Full Troubleshooting First steps Battery replacement Beep codes Page DIM code checkpoints BIOS CD or DVD drive Diskette drive Expansion cards Hard drive To repair the master boot record: Internet Keyboard Memory Modem (telephone dial-up) To check the dialing properties in Windows 2000 Server: Monitor Power Processor Telephone support Before calling Gateway Customer Care Telephone support Telephone numbers Tutoring and training Page Server Specifications System specifications System board specifications Environmental specifications Electronic specifications Memory map Interrupts Additional specifications BIOS Settings To view all BIOS settings: Advanced Page Page Security Power BIOS submenu BIOS 2nd level submenu PCI Express Configuration Safety, Regulatory, and Legal Information •Safety information •Legal and Regulatory Information Important safety information Page Regulatory compliance statements United States of America Canada Page Laser safety statement California Proposition 65 Warning Environmental information Notices Page Index Numerics CD 2, 39