Follow the instructions in “Closing the server case” on page 37.

Chapter 4: Installing Components

To install or replace memory:

1

2

3 Pull the plastic tabs away from the sides of the memory module slot. If you are replacing a memory module, remove the old module.

4 Align the notch on the new module with the notch in the memory module slot and press the module firmly into the slot. The tabs on the sides of the memory slot should secure the memory module automatically.

5

6 Restart your server and open the BIOS Setup utility. Verify the System Memory listed in the Main menu. When you exit the BIOS Setup utility, make sure that the operating system loads completely.

46

www.gateway.com