Connect the power and data cables.
Secure the system board to the case with the seven (7) screws you removed previously.

Replacing the system board

9 Pull the system board away from the case and carefully remove it, then place it in a static-free bag on a stable work surface.

10 Insert the new system board into the case, aligning the holes in the board with the threaded standoffs on the side of the case.

11

12 Reinstall the memory by following the instructions in “Installing memory” on page 45.

13 Reinstall the processor and heatsink by following the instructions in “Replacing the processor” on page 51.

14

15 Reinstall the expansion cards by following the instructions in “Installing PCI expansion cards” on page 47.

16 Follow the instructions in “Closing the server case” on page 37.

www.gateway.com

63