Bags and Gloves E-9220T Replacing the system board, To replace the system board:

Follow the instructions in “Preventing static electricity discharge” on page 29. Follow the instructions in “Opening the server case” on page 30.

Replacing the system board

Replacing the system board

To replace the system board:

1

2

3 Remove the processor air duct by following the instructions in “Removing the processor air duct” on page 33.

4 Remove the memory modules by following the instructions in “Installing memory” on page 45.

5 Remove all of the expansion cards by following the instructions in “Installing PCI expansion cards” on page 47.

6 Remove the heat sink and processor by following the instructions in “Replacing the processor” on page 51.

7 Disconnect the power and data cables from the system board, noting their locations and orientation. (You will reconnect the cables after you install the new board.)

www.gateway.com 61