Chapter 5: Using the BIOS Setup Utility

3 Remove the jumper across pins 1-2 of header J3F3, then place the jumper across pins 2-3.

Jumper

J3F3

4 Follow the instructions in “Closing the server case” on page 37.

5 Reconnect the power cords and turn on the server. The BIOS password(s) is cleared.

6 Turn off the server, then disconnect the power cords and all other cables connected to the server.

7 Follow the instructions in “Opening the server case” on page 30.

8 Place the jumper back onto pins 1-2.

9 Follow the instructions in “Closing the server case” on page 37.

70

www.gateway.com