Bags and Gloves E-9220T Resetting BIOS passwords, To clear the BIOS password(s):

Follow the instructions in “Closing the server case” on page 37.

Reconnect the power cords and turn on the server. The BIOS memory is cleared.

Resetting the BIOS

9

10

11 Turn off the server, then disconnect the power cords and all other cables connected to the server.

12

13

14

15

16

Follow the instructions in “Opening the server case” on page 30

Place the jumper back onto pins 1-2.

Follow the instructions in “Closing the server case” on page 37.

Turn on the server. A message appears saying that the CMOS Date and Time are not set.

Press F1 to reset the BIOS to factory default settings.

Resetting BIOS passwords

To reset BIOS password(s), you must either reset and clear all BIOS settings, or use the Password Clear jumper. To reset BIOS passwords, follow the instructions in “Resetting the BIOS” on page 68.

To clear the BIOS password(s):

1 Turn off the server, then disconnect the power cords and all other cables connected to the server.

2 Follow the instructions in “Opening the server case” on page 30.

Moving the jumper while the power is on can damage your server.

Caution Always turn off the server and unplug the power cords and all other cables before changing the jumper.

www.gateway.com 69