Chapter 4: Installing Components

To configure the SATA RAID solution:

1 Open the BIOS Setup utility as described in the previous procedure.

2 Select Create RAID Volume from the Management menu.

3 Enter the name of the volume, or press ENTER to accept the default.

4 Use the up and down arrow keys to select a RAID level.

5 Set the RAID stripe size (unless your RAID level uses mirroring).

6 Set the capacity of the volume, then press ENTER to create the volume.

7 When you have defined the current volume, confirm your settings when prompted. 8 Repeat Step 2 through Step 7 to configure additional volumes.

9 Exit the RAID Configuration utility and reboot the server.

44

www.gateway.com